
Hardwood floor refinishing in Vaughan
Sanding, optional stain and finish coats for wood floors with enough material left to refinish.
Wear through the middle of the room
If the finish in your Maple living room is worn along the route to the kitchen, show us that path and the less worn wood under the edge of a rug.
Photograph any dark patch, wide gap or exposed nail head separately because sanding will not correct every mark in the same way.
MRG sands and refinishes existing hardwood, with stain when you want it and the finish coats agreed for the job.
We check how much wood remains before confirming that the floor can be sanded.
An engineered floor depends on the thickness of its wood top layer, so send the original product details if you still have them.
Tell us if the floor has been refinished before, even if you do not know how many times.
What sanding can leave behind
- Deep stains
- A pet stain that passed through the finish and into the wood can remain after sanding, so include its location and size in the request.
- Thin boards
- Wear near nail heads and the remaining board thickness matter because more sanding removes more wood from the surface.
- Damaged boards
- Boards worn thin or damaged are replaced before sanding when that replacement is part of the agreed work.
- Adjoining rooms
- Show the doorway where the refinishing will stop, including a hall or dining room that keeps its present finish.
Sanding and finish coats
The work starts with a coarse sanding to remove the old finish and level the boards, followed by finer grits.
An edger reaches along the walls, and corners need work with a hand scraper.
After vacuuming, any agreed stain goes on before the finish coats, with light sanding between coats.
Each coat has to dry before the next part of the work.
The sanding machines have vacuum attachments, but some dust still reaches the rest of the home.
Tell us if nearby rooms contain furniture or belongings that must stay there during the job.
Before sanding, agree on furniture moving and the baseboards that need attention.
Living in the house during refinishing
In a Woodbridge house where the living room connects the entrance to the kitchen, that walking route needs to be part of the schedule.
Tell us which rooms you must reach and where furniture can stay while the floor is out of use.
Water-based and oil-based finishes dry at different speeds, and both need curing time before rugs and furniture return.
The written agreement gives dates for using the floor after the chosen finish.
A surface being dry enough for the next step does not settle every question about putting the room back together.
Include any planned delivery, family visit or other work that would need to cross the room.
For a Vaughan condo, send the management instructions on work hours and deliveries before arranging the job.
Related work and Vaughan access
Questions about floor refinishing
Which worn areas should be shown before sanding?
If the finish in your Maple living room is worn along the route to the kitchen, show us that path and the less worn wood under the edge of a rug.
Photograph any dark patch, wide gap or exposed nail head separately because sanding will not correct every mark in the same way.
MRG sands and refinishes existing hardwood, with stain when you want it and the finish coats agreed for the job.
Can every stain be removed by refinishing?
A pet stain that passed through the finish and into the wood can remain after sanding, so include its location and size in the request.
Wear near nail heads and the remaining board thickness matter because more sanding removes more wood from the surface.
Boards worn thin or damaged are replaced before sanding when that replacement is part of the agreed work.
What are the stages between sanding and the final finish?
The work starts with a coarse sanding to remove the old finish and level the boards, followed by finer grits.
An edger reaches along the walls, and corners need work with a hand scraper.
After vacuuming, any agreed stain goes on before the finish coats, with light sanding between coats.
Show the wear and the room edges
Send the approximate area, close views of damage and the rooms that need to stay accessible.